๐Ÿ”ง Pool Filter Service & Repair

Pool filter service in Hartland, WI. Sand, cartridge, and DE filter cleaning, repair, and media replacement. Serving Lake Country. Call (262) 367-8281.

Complete Filter Service

Your filter is what keeps your water clear. When it is not working right โ€” high pressure, cloudy water despite good chemistry, or poor flow โ€” your entire pool suffers. We service all three filter types.

Sand Filters

Sand media replacement every 5 to 7 years, lateral inspection and replacement, multiport valve repair, and proper backwashing technique guidance.

Cartridge Filters

Cartridge inspection, deep cleaning, and replacement. We stock cartridges for all major brands. Typical replacement cycle: 1 to 3 years depending on usage and pool environment.

DE (Diatomaceous Earth) Filters

Grid inspection and replacement, DE recharging, manifold repair, and backwash valve service. DE filters provide the finest filtration but require more maintenance โ€” we make it easy.

Filter Pressure Rule: Clean or service your filter when pressure rises 8 to 10 PSI above the clean starting pressure. If you do not know your clean starting pressure, write it on the filter tank with a permanent marker after your next cleaning.

Complete pool equipment pad with sand filter, heater, and pump maintained by Heartland Pool and Spa

Sand, Cartridge & DE โ€” We Do It All

That big tank does the quiet work of keeping your water clear โ€” until the media inside wears out. Sand goes dull and channels, cartridges blind off, DE grids tear. When that happens, no amount of chemicals will fix cloudy water.

We service every filter type on pads across Waukesha County: media changes, valve rebuilds, gauge and o-ring replacement, and the multiport problems that quietly send your water to waste.

  • Sand changes with fresh media โ€” the cure for permanently cloudy water
  • Cartridge deep-cleaning and replacement
  • Multiport valve rebuilds, gauges, laterals, and o-rings
Request Service
How It Works

A Filter Visit, Start to Finish

1
Inspect & Pressure Check
Baseline pressure, flow, and a look inside. The gauge tells a story most owners never get to read.
2
Clean or Replace Media
Backwash-resistant sand gets swapped, cartridges deep-cleaned or replaced, DE grids inspected and recoated.
3
Rebuild the Small Stuff
Spider gaskets, o-rings, sight glasses, air relief โ€” the $10 parts that cause $100 headaches.
4
Flow Test
Reassembled, pressurized, and verified: clear return flow and a gauge reading we write down for next time.
Common Questions

Good to Know

Every 5 to 7 seasons for most Wisconsin pools. If your water stays dull no matter what you add, or backwashing barely drops the pressure, the sand is probably spent.
When the pressure gauge reads 8-10 psi above your clean baseline. Backwashing too often actually hurts โ€” slightly dirty sand filters better than fresh-rinsed sand.
That is the classic sign of a filtration problem, not a chemistry problem โ€” channeled sand, a torn cartridge, or a bypassing valve. Bring us a sample and a photo of your pad and we will narrow it down fast.
Service Coverage

Serving All of Lake Country

Ready for Crystal Clear?

Call us, stop by with a water sample, or send a message. We make it easy.